你不可不看的Oracle RAC日常基本維護命令
作者：佚名
本文主要分享一些Oracle RAC日常基本維護命令，希望對你有所幫助。
所有實例和服務的狀態
- $ srvctl status database -d orcl
- Instance orcl1 is running on node linux1
- Instance orcl2 is running on node linux2
單個實例的狀態
- $ srvctl status instance -d orcl -i orcl2
- Instance orcl2 is running on node linux2
在數據庫全局命名服務的狀態
- $ srvctl status service -d orcl -s orcltest
- Service orcltest is running on instance(s) orcl2, orcl1
特定節點上節點應用程序的狀態
- $ srvctl status nodeapps -n linux1
- VIP is running on node: linux1
- GSD is running on node: linux1
- Listener is running on node: linux1
- ONS daemon is running on node: linux1
ASM 實例的狀態
- $ srvctl status asm -n linux1
- ASM instance +ASM1 is running on node linux1.
列出配置的所有數據庫
- $ srvctl config database
- orcl
顯示 RAC 數據庫的配置
- $ srvctl config database -d orcl
- linux1 orcl1 /u01/app/oracle/product/10.2.0/db_1
- linux2 orcl2 /u01/app/oracle/product/10.2.0/db_1
顯示指定集群數據庫的所有服務
- $ srvctl config service -d orcl
- orcltest PREF: orcl2 orcl1 AVAIL:
顯示節點應用程序的配置 —(VIP、GSD、ONS、監聽器)
- $ srvctl config nodeapps -n linux1 -a -g -s -l
- VIP exists.: /linux1-vip/192.168.1.200/255.255.255.0/eth0:eth1
- GSD exists.
- ONS daemon exists.
- Listener exists.
顯示 ASM 實例的配置
- $ srvctl config asm -n linux1
- +ASM1 /u01/app/oracle/product/10.2.0/db_1
集群中所有正在運行的實例
- inst_id, instance_number inst_no, instance_name inst_name, parallel, status, database_status db_status, active_state state, host_name hostFROM gv$instanceORDER BY inst_id;INST_ID INST_NO INST_NAME PAR STATUS DB_STATUS STATE HOST-------- -------- ---------- --- ------- ------------ --------- -------1 1 orcl1 YES OPEN ACTIVE NORMAL rac12 2 orcl2 YES OPEN ACTIVE NORMAL rac2
位于磁盤組中的所有數據文件
- union
- select member from v$logfile
- union
- select name from v$controlfile
- union
- select name from v$tempfile;
- NAME
- -------------------------------------------
- +FLASH_RECOVERY_AREA/orcl/controlfile/current.258.570913191
- +FLASH_RECOVERY_AREA/orcl/onlinelog/group_1.257.570913201
- +FLASH_RECOVERY_AREA/orcl/onlinelog/group_2.256.570913211
- +FLASH_RECOVERY_AREA/orcl/onlinelog/group_3.259.570918285
- +FLASH_RECOVERY_AREA/orcl/onlinelog/group_4.260.570918295
- +ORCL_DATA1/orcl/controlfile/current.259.570913189
- +ORCL_DATA1/orcl/datafile/example.257.570913311
- +ORCL_DATA1/orcl/datafile/indx.270.570920045
- +ORCL_DATA1/orcl/datafile/sysaux.260.570913287
- +ORCL_DATA1/orcl/datafile/system.262.570913215
- +ORCL_DATA1/orcl/datafile/undotbs1.261.570913263
- +ORCL_DATA1/orcl/datafile/undotbs1.271.570920865
- +ORCL_DATA1/orcl/datafile/undotbs2.265.570913331
- +ORCL_DATA1/orcl/datafile/undotbs2.272.570921065
- +ORCL_DATA1/orcl/datafile/users.264.570913355
- +ORCL_DATA1/orcl/datafile/users.269.570919829
- +ORCL_DATA1/orcl/onlinelog/group_1.256.570913195
- +ORCL_DATA1/orcl/onlinelog/group_2.263.570913205
- +ORCL_DATA1/orcl/onlinelog/group_3.266.570918279
- +ORCL_DATA1/orcl/onlinelog/group_4.267.570918289
- +ORCL_DATA1/orcl/tempfile/temp.258.570913303
- 21 rows selected.
屬于 “ORCL_DATA1” 磁盤組的所有 ASM 磁盤
- FROM v$asm_disk
- WHERE group_number IN (
- select
- group_number
- from
- v$asm_diskgroup
- where name = 'ORCL_DATA1' );
- PATH
- ----------------------------------
- ORCL:VOL1
- ORCL:VOL2
啟動 / 停止 RAC 集群
確保是以 oracle UNIX 用戶登錄的。我們將從 rac1 節點運行所有命令：
- # su – oracle
- $ hostname
- Rac1
停止 Oracle RAC 10g 環境
第一步是停止 Oracle 實例。當此實例(和相關服務)關閉后，關閉 ASM 實例。最后，關閉節點應用程序(虛擬 IP、GSD、TNS 監聽器和 ONS)。
- $ export ORACLE_SID=orcl1
- $ emctl stop dbconsole
- $ srvctl stop instance -d orcl -i orcl1
- $ srvctl stop asm -n rac1
- $ srvctl stop nodeapps –n rac1
啟動 Oracle RAC 10g 環境
第一步是啟動節點應用程序(虛擬 IP、GSD、TNS 監聽器和 ONS)。當成功啟動節點應用程序后，啟動 ASM 實例。最后，啟動 Oracle 實例(和相關服務)以及企業管理器數據庫控制臺。
- $ export ORACLE_SID=orcl1
- $ srvctl start nodeapps -n rac1
- $ srvctl start asm -n rac1
- $ srvctl start instance -d orcl -i orcl1
- $ emctl start dbconsole
使用 SRVCTL 啟動 / 停止所有實例
啟動 / 停止所有實例及其啟用的服務。我只是覺得有意思就把此步驟作為關閉所有實例的一種方法加進來了!
- $ srvctl start database -d orcl
- $ srvctl stop database -d orcl
啟停止監聽
- hostb$lsnrctl start listener_hostb
- hostb$lsnrctl stop listener_hostb 備份 votning diskdd if =voting_disk_name f=backup_file_name dd if = /dev/ rdsk/c4t600C0FF000000000098ADE240330A000d0s4 f=votingdisk.bak # dd if=/dev/zero f=/dev/rdsk/c4t600C0FF000000000098ADE240330A000d0s4 bs=512 count=261120
- 測試
- # dd if=/dev/rdsk/c4t600C0FF000000000098ADE240330A000d0s4 f=/data/backup/rac/vd_backup0420.bak
- 261120 + 0 記錄進入
- 261120 + 0 記錄調出
- # cd /data/backup/rac
- # ls
- ocr0420.bak ocrdisk vd_backup0420.bak votingdisk.bak votingdisk0420.bak
- # dd if=/data/backup/rac/vd_backup0420.bak f=/dev/rdsk/c4t600C0FF000000000098ADE240330A000d0s4
- 261120 + 0 記錄進入
- 261120 + 0 記錄調出
- 備份 OCR 磁盤
- 查看備份
- $ocrconfig -showbackup
- 備份
- /data/oracle/crs/bin/ocrconfig - export /data/backup/rac/ocrdisk.bak
- 還原 需要停掉所有的節點， Stop the Oracle Clusterware software on all of the nodes
- /data/oracle/crs/bin/ocrconfig - import file_name
- 自動備份的還原# /data/oracle/crs/bin/ocrconfig -showbackup
- # /data/oracle/crs/bin/ocrconfig -restore /data/oracle/crs/cdata/db168crs/backup00.ocrhosta$cluvfy comp ocr -n all // 檢驗
- ocr 檢查
- #ocrcheck 配置路徑在
- / var /opt/oracle/ocrconfig_loc 文件里面 如果需要更改 OCR 磁盤的路徑配置。
- OCR 磁盤空間檢查
- # /data/oracle/crs/bin/ocrcheck
- Status of Oracle Cluster Registry is as follows :
- Version : 2
- Total space (kbytes) : 399752
- Used space (kbytes) : 3784
- Available space (kbytes) : 395968
- ID : 148562961
- Device / File Name : /dev/ rdsk/c4t600C0FF000000000098ADE240330A000d0s5
- Device / File integrity check succeeded Device / File not configured Cluster registry integrity check succeeded #
ASM 實例的狀態
- ASM 實例 +ASM1 正在節點 hosta 上運行。
- hosta$ 特定節點上節點應用程序的狀態
- hosta$srvctl status nodeapps -n hosta
- VIP 正在運行的節點: hosta
- GSD 正在運行的節點: hosta
- 監聽程序未在節點上運行: hosta
- ONS 守護程序正在節點上運行: hosta
- hosta$ 所有實例和服務的狀態
- hosta$srvctl status database -d cole
- 實例 cole1 正在節點 hosta 上運行
- 實例 cole2 正在節點 hostb 上運行
- hosta$ 列出配置的所有數據庫
- hosta$srvctl config database
- cole
- hosta$
- 顯示 RAC 數據庫的配置 hosta$srvctl config database -d cole
- hosta cole1 /data/oracle/OracleHome
- hostb cole2 /data/oracle/OracleHome
- hosta$ 顯示 ASM 實例的配置
- hosta$srvctl config asm -n hosta
- +ASM1 /data/oracle/OracleHome 顯示節點應用程序的配置 -（VIP、GSD、ONS、監聽器）
- hosta$srvctl config nodeapps -n hosta -a -g -s -l
- VIP 已存在。: /a1-vip/10.1.1.9/255.255.0.0/ce0
- GSD 已存在。
- ONS 守護程序已存在。
- 監聽程序已存在。
- hosta$
- 集群中所有正在運行的實例
- SELECT inst_id, instance_number inst_no, instance_name inst_name, parallel, status, database_status db_status, active_state state, host_name host
- FROM gv$instance
- ORDER BY inst_id; INST_ID INST_NO INST_NAME PAR STATUS DB_STATUS STATE HOST
- ---------- ---------- ---------------- --- ------------ -------------------------- -
- 1 1 cole1 YES OPEN ACTIVE NORMAL hosta
- 2 2 cole2 YES OPEN ACTIVE NORMAL hostb
位于磁盤組中的所有數據文件
- SQL>select name from v$datafile
- union
- select member from v$logfile
- union
- select name from v$controlfile
- union
- select name from v$tempfile;
責任編輯：龐桂玉
來源：
Oracle疑點通
