MySQL通過 XtraBackup 備份恢復單個庫

作者：王權富貴 2023-01-11 08:05:23

通過上述方法可以快速備份恢復大數據量的庫，也可以同時指定多個庫，單張表或多張表進行恢復。可參考官方文檔 Partial Backups - Percona XtraBackup。

1.概述

本文通過 XtraBackup 備份單個數據庫，然后恢復到另一個實例，用于快速遷移大數據量，使用的軟件版本為：

軟件名	版本
MySQL	mysql-5.7.39-linux-glibc2.12-x86_64.tar.gz
XtraBackup	percona-xtrabackup-24-2.4.26-1.el7.x86_64.rpm

在2臺主機分別安裝一個MySQL實例：

主機	IP地址	端口號
MySQL-A	192.168.100.10	5508
MySQL-B	192.168.100.11	5508

2.在MySQL-A初始化數據

通過sysbench 初始化數據，10張表，每張表10000條記錄

shell> sysbench src/lua/oltp_read_write.lua --mysql-db=sysbench --mysql-host=192.168.100.10 --mysql-port=5508 --mysql-user=greatsql --mysql-password='greatsql' --tables=10 --table_size=10000 --report-interval=2 --threads=50 --time=1000  --mysql_storage_engine=innodb --partitions=3 --skip_trx=0 --mysql-ignore-errors=all prepare

3.通過 xtrabackup 備份 MySQL-A 的 sysbench 庫

shell> innobackupex --defaults-file=/mysql/conf/my5508.cnf  --user greatsql --password greatsql -H127.0.0.1 -P5508  --databases sysbench  /mysql/dbbackup
...
...
221229 10:11:17 Executing UNLOCK TABLES
221229 10:11:17 All tables unlocked
221229 10:11:17 [00] Copying ib_buffer_pool to /mysql/dbbackup/2022-12-29_10-11-07/ib_buffer_pool
221229 10:11:17 [00]        ...done
221229 10:11:17 Backup created in directory '/mysql/dbbackup/2022-12-29_10-11-07/'
MySQL binlog position: filename 'binlog.000005', position '190', GTID of the last change '3e362a47-8683-11ed-92e1-00163ed294ac:1-87'
221229 10:11:17 [00] Writing /mysql/dbbackup/2022-12-29_10-11-07/backup-my.cnf
221229 10:11:17 [00]        ...done
221229 10:11:17 [00] Writing /mysql/dbbackup/2022-12-29_10-11-07/xtrabackup_info
221229 10:11:17 [00]        ...done
xtrabackup: Transaction log of lsn (1123405728) to (1123405737) was copied.
221229 10:11:17 completed OK!

4.備份 MySQL-A sysbench 庫的表結構

shell> /mysql/svr/mysql/bin/mysqldump -ugreatsql -pgreatsql -h127.0.0.1 -P5508 --single-transaction --set-gtid-purged=OFF --master-data=2  -d  -B sysbench > sysbench.sql
mysqldump: [Warning] Using a password on the command line interface can be insecure.

5.將備份的 sysbench 庫的表結構導入 MySQL-B

shell> /mysql/svr/mysql/bin/mysql -ugreatsql -pgreatsql -h192.168.100.11 -P5508 < sysbench.sql
mysql: [Warning] Using a password on the command line interface can be insecure.

6.登錄 MySQL-B 生成丟棄/導入表空間的 SQL 語句

# 生成丟棄表空間的SQL
mysql> select concat('alter table ',table_schema,'.',TABLE_NAME , ' discard tablespace', ';') from  information_schema.tables where TABLE_SCHEMA = 'sysbench' into outfile '/tmp/discard.sql';
Query OK, 10 rows affected (0.00 sec)
# 生成導入表空間的SQL
mysql> select concat('alter table ',table_schema,'.',TABLE_NAME , ' import tablespace', ';') from  information_schema.tables where TABLE_SCHEMA = 'sysbench' into outfile '/tmp/import.sql';
Query OK, 10 rows affected (0.01 sec)

7.登錄 MySQL-B 執行丟棄表空間的 SQL 語句

mysql> source /tmp/discard.sql;

8.查看 MySQL-B 底層數據文件

shell> ll -h /mysql/dbdata/data5508/data/sysbench/
total 124K
-rw-r----- 1 mysql mysql   67 Dec 29 10:25 db.opt
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:25 sbtest10.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:25 sbtest1.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:25 sbtest2.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest3.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest4.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest5.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest6.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest7.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest8.frm
-rw-r----- 1 mysql mysql 8.5K Dec 29 10:26 sbtest9.frm

可以看到ibd文件已被丟棄

9.prepare 備份文件

注意這里需要加 --export 選項，它允許導出單個表以進行導入到另一個服務器

shell> innobackupex --apply-log --export /mysql/dbbackup/2022-12-29_10-11-07
xtrabackup: recognized server arguments: --innodb_checksum_algorithm=crc32 --innodb_log_checksum_algorithm=strict_crc32 --innodb_data_file_path=ibdata1:12M:autoextend --innodb_log_files_in_group=4 --innodb_log_file_size=33554432 --innodb_fast_checksum=0 --innodb_page_size=16384 --innodb_log_block_size=512 --innodb_undo_directory=/mysql/dbdata/data5508/log --innodb_undo_tablespaces=0 --server-id=2 --redo-log-version=1 
xtrabackup: recognized client arguments: 
221229 10:56:58 innobackupex: Starting the apply-log operation

IMPORTANT: Please check that the apply-log run completes successfully.
           At the end of a successful apply-log run innobackupex
           prints "completed OK!".
...
...
xtrabackup: starting shutdown with innodb_fast_shutdown = 0
InnoDB: FTS optimize thread exiting.
InnoDB: Starting shutdown...
InnoDB: Shutdown completed; log sequence number 1123519528
221229 10:57:13 completed OK!

10.查看備份文件目錄

shell> ll -h /mysql/dbbackup/2022-12-29_10-11-07/sysbench/
total 271M
-rw-r----- 1 root root   67 Dec 29 10:11 db.opt
-rw-r----- 1 root root 8.5K Dec 29 10:11 sbtest10.frm
-rw-r--r-- 1 root root  578 Dec 29 10:57 sbtest10#P#p0.cfg
-rw-r----- 1 root root  16K Dec 29 10:57 sbtest10#P#p0.exp
-rw-r----- 1 root root 9.0M Dec 29 10:11 sbtest10#P#p0.ibd
-rw-r--r-- 1 root root  578 Dec 29 10:57 sbtest10#P#p1.cfg
-rw-r----- 1 root root  16K Dec 29 10:57 sbtest10#P#p1.exp
-rw-r----- 1 root root 9.0M Dec 29 10:11 sbtest10#P#p1.ibd
-rw-r--r-- 1 root root  578 Dec 29 10:57 sbtest10#P#p2.cfg
...

可以看到prepare備份文件后，多了 cfg,exp結尾的文件

11.傳輸備份文件

將準備好的備份文件中后綴名為cfg，ibd，exp的文件傳輸到MySQL-B實例的sysbench庫下

shell> scp -r /mysql/dbbackup/2022-12-29_10-11-07/sysbench/*.ibd /mysql/dbbackup/2022-12-29_10-11-07/sysbench/*.cfg /mysql/dbbackup/2022-12-29_10-11-07/sysbench/*.exp root@192.168.100.11:/mysql/dbdata/data5508/data/sysbench/

12.修改傳輸過來的文件的屬主屬組

shell> chown -R mysql.mysql /mysql

13.登錄 MySQL-B 執行導入表空間的 SQL 語句

mysql> source /tmp/import.sql;

14.登錄 MySQL-B 檢查一張表是否正常

mysql> select count(*) from sysbench.sbtest1;
+----------+
| count(*) |
+----------+
|    10000 |
+----------+
1 row in set (0.01 sec)

15.使用 sysbench 進行壓測 MySQL-B

shell> sysbench src/lua/oltp_read_write.lua --mysql-db=sysbench --mysql-host=192.168.100.11 --mysql-port=5508 --mysql-user=greatsql --mysql-password='greatsql' --tables=10 --table_size=10000 --report-interval=2 --threads=50 --time=300  --mysql_storage_engine=innodb --partitions=3 --skip_trx=0 --mysql-ignore-errors=all run
sysbench 1.1.0-df89d34 (using bundled LuaJIT 2.1.0-beta3)
...
...
SQL statistics:
    queries performed:
        read:                            1702400
        write:                           486400
        other:                           243200
        total:                           2432000
    transactions:                        121600 (405.25 per sec.)
    queries:                             2432000 (8105.04 per sec.)
    ignored errors:                      0      (0.00 per sec.)
    reconnects:                          0      (0.00 per sec.)

Throughput:
    events/s (eps):                      405.2522
    time elapsed:                        300.0601s
    total number of events:              121600

Latency (ms):
         min:                                    9.04
         avg:                                  123.36
         max:                                 1512.19
         95th percentile:                      590.56
         sum:                             15000942.35

Threads fairness:
    events (avg/stddev):           2432.0000/58.48
    execution time (avg/stddev):   300.0188/0.01

壓測正常

16.重啟MySQL-B并查詢一張表

mysql> shutdown;
shell> /mysql/svr/mysql/bin/mysqld_safe --defaults-file=/mysql/conf/my5508.cnf --user=mysql &
mysql> select count(*) from sysbench.sbtest2;
+----------+
| count(*) |
+----------+
|    10000 |
+----------+
1 row in set (0.04 sec)

總結

通過上述方法可以快速備份恢復大數據量的庫，也可以同時指定多個庫，單張表或多張表進行恢復。可參考官方文檔 Partial Backups - Percona XtraBackup。

責任編輯：武曉燕來源： GreatSQL社區